Replacement Patio Door Handle
Patio door handles are a critical component of the security of your home. It is essential to address any issues with your patio lock as fast as possible to keep your home secure.
To get started to begin, you must first determine your existing patio door lock. This will allow you to determine the type of replacement lock to purchase.
Identification
The lock on your patio door plays an important role in the operation and security of your home. Over time, it can become worn or damaged and need to be replaced. This can be due to a variety of causes such as a damaged handle, loose latch or the inability of turning a handle spindle in a proper manner. Most homeowners can replace their patio door lock themselves.
Begin by identifying what kind of lock you own. This can be done by examining the way the handle's small actuator lever enters the latch's havep or examining the lock itself. This is important as the kind of lock you'll need will be based on the design of your patio doors as well as the specific issue you have with the lock.
Rectangular mortise locks that are cut-out are typically used in aluminum patio doors. However, they can be found in wood and vinyl patio doors as well. The locks are set in a recess within the patio door frame. They have rectangular screw holes. You can also make use of a digital camera to take a photograph of the lock and then relay this information to the vendor you purchase from. This is a great method to ensure that your new patio door lock is aligned properly with your existing system.
On older patio doors, you can have locks that have top and bottom tabs. These locks are more secure than sliding bolt locks since they enclose the door frame to prevent the door from being raised or forced. Sliding bolt locks are typically more prevalent on modern patio doors, as they are fitted with a steel slide bolt that retracts into a strike plate for added security and strength.
For extra security, you can install a keyed lock to your patio doors by replacing the current knob and handle with one made to accept a lock with a key. This is a great method to keep your family, pets and other belongings secure and stop intruders from accessing your patio doors, particularly if you live in an area with high crime rates.
Cleaning
When a patio lock is functioning correctly it will keep the door securely against intruders and weather elements. But, like all hardware outdoor door locks, they require periodic cleaning and lubrication to avoid them from becoming stiff or unable to perform their duties. The good part is that cleaning is easy, simple and inexpensive and can be performed by any homeowner.
A noisy patio door is usually caused by dust and dirt buildup inside the mechanism. A simple solution of baking soda and vinegar can be used to loosen the dirt and make it easier to clean with the help of a toothbrush or sponge. During this cleaning process, it's also an excellent idea to make use of a can of compressed air to blast away any dirt-laden particles that are stubborn to remove.
To prevent squeaks, apply a thin layer of lubricant on the keyholes, latches, and other moving components after cleaning. Be careful not to apply too much lubricant since it could attract dirt and interfere with the functionality.
After lubrication, a gentle examination of the lock needs to be carried out to ensure it's working as intended. If the lock still squeaks, it may be due to a small misalignment between the hinges and frame. If this is the case, it's crucial to fix the issue before it gets any worse by adjusting the door until it sits flush with the frame and the locking points are aligned.
A uPVC door handle that won't budge can be a huge inconvenience, especially as it makes your home vulnerable to burglars and the elements. This issue can arise in a number of ways from minor changes in weather to lack of maintenance on movable parts. If the issue is addressed promptly it is possible to bring back the door's function. The best way to protect your home is to take care of your uPVC doors and locks with proper cleaning and care.
Lubrication
The lock mechanisms of your patio door could be affected by dust, debris or rust that could make them difficult to open and latch. In these cases, lubrication is needed to fix the issue. It is crucial to clean your lock mechanisms prior to applying the lubricant. The lubricant must not be oily since it could draw dust particles, which could cause additional problems for your patio doors. Hardware stores sell dry lubricants that are ideal for the lubrication of lock mechanisms.
Powdered graphite is the most effective lubricant to use for locks. It has been used by locksmiths to lubricate small metal parts for decades because it doesn't attract dust like liquid lubricants. It has a waxy feel that will stay in the lock for long-lasting lubrication. Graphite is safe to use and can be applied regularly to ensure that the lock is operating smoothly.
If you wish to lubricate your lock, you should first clean it using an impermeable cleaner like WD-40. After cleaning the keyhole, lock, mechanism, and cylinder, you can apply dry lubricant. This will allow the lock to operate smoothly and stop it from becoming stuck or blocked.
repairmywindowsanddoors -quality silicone spray is available in most hardware stores, under different brands. This type of lubricant can be the best and comes in various sizes. It will also protect your lock from corrosion. Before the invention of dry lubricants those who wanted to lubricate something with fine moving parts often used oils like WD-40 but this method can cause dust to build up and damage the lock.
If your sliding glass patio door handles are squeaky or difficult to open and close, it could be time to replace the lock assembly. The problem is usually caused by loose screws, rust, or a misalignment of the latch's hasp. Fortunately replacing the lock is simple and can be done without much effort. If you're unsure how to proceed, you can contact an experienced company to get advice and assistance.
Installation
The patio door lock is a crucial part of your home security system. A lock of high-quality and that is in good working order will ensure that your family and belongings are safe from unwanted intruders. Regular maintenance and inspection can ensure that the lock is working correctly. If you find any issues with your patio door lock, it is recommended that you seek assistance from a professional. A locksmith or door hardware expert can provide the professional guidance you need and will assist in ensuring that your new patio door lock is set up correctly.
You'll need to find the existing handle on your patio door. The keyway is where the key goes to unlock or lock the door. When buying an entirely new lock you can precisely describe the keyway by taking a photo.
You will also want to be aware of the type of lock that you own. Different types of locks will have different mounting holes and swing directions, in addition to different sizes of hasps. These details will help determine the type of patio door lock you'll should purchase for your sliding door.
Surface mount locks, such as those shown here by Cal-Tech, are easy to install and work on all sliding patio doors. The handle that was previously installed must be removed with an screwdriver, however the surface mount lock can be installed after the screws have been removed.
Mortise locks made of steel are common on wooden and aluminum frame for patio doors. They are placed in a pocket that is cut into the frame. They are more difficult than other patio door lock types to replace, but with some time and effort, you can accomplish it.
It is essential to know the exact dimensions of your mortise lock so that you can replace it with a similar one. Most mortise locks share the same overall dimensions, but there are a few key distinctions. The most noticeable distinction is that some locks have vertical keyways while others have keys that are angled to 45 degrees.